Versa P440 Disassembly

Required Tools

Disassembly Instructions

DIP Switch Setting

Reassembly Instructions

NEC Computers APAC Page 1

Versa P440 Service Guide

Required Tools

All Versa P440 maintenance procedures can be performed using the following

tools

Tweezers

Small Philips screwdriver

Spacer screwdriver 5MM

Right angled dentist style probe

NEC Computers APAC Page 2

• Easy to use wizard interface.
• Copy drivers to a USB Drive or Hard Disk Drive or burn them to a DVD or CD using the built in CD burning software.
• Don't trust personal data to a computer repair center or the local computer expert. This system has a step by step walkthorough thats so easy to use even my Gandma could use it.
• All Windows operating systems supported 32 Bit and 64 Bit (Windows XP, Windows Vista, Windows 7 and newer!
• Perfect for operating system migratiion, find all the drivers for any operating system even if the manufacturers say its not supported.
• Creates an attractive driver install wizard with full instructions to help install all the drivers easily.
• After sales support with download protection, phone support and 24 hour helpdesk support system.
• Driver Disk Builder is only £9.95 a great alternative if your driver disk or model number is not listed on this site

The Driver Disk Builder system is compatible with, but not limited to all the following 32 & 64 Bit operating systems

This driver detection system will find all the drivers for any windows based computer and all connected hardware.

1. At this stage a few dialog boxes will be displayed asking a series of questions, set out below, this is to ascertain many aspects of the driver install system.
2. If the driver detector program is being used on the computer that the drivers are required for then the procedure is very straight forward.
   
3. Is the computer connected to the internet?
   
4. At this point the driver detector systems will double check that there is a connection to the driver detector servers.
   
5. After pressing next, driver detector will scan your system (the results of which you can choose to view) and submit the results to the driver detector servers. These scan results consist of a complete list of all the hardware connected to your computer. Any and every device connected to the computer would be detected with the correct driver matched to work with any windows operating system!
   
6. Using the next dialog box the device scan results can be viewed and or saved for later use.
   
7. Press 'Start' to move the process on to the next step where the selection of Manufacturer and operating system is required.
8. ** Please note ALWAYS select 'OEM' even if your machines manufacturer is listed on the dropdown. This part of the program can be re run as many times as required. Only select your manufacturer if the default of 'OEM' does not find all of the drivers or there are some areas on the results page highlighted in red.
   
   
9. A complete or partial match will be presented both results are shown below Complete Driver Match
   
   Incomplete Driver Match
   
10. To create a driver disk press 'NEXT' then log into an existing account or create a new one. If the driver detector system did not produce a 100% complete driver match for all devices the resulting disk would be half price.
    
11. Once the account has been verified or the disk paid for the drivers will start downloading.
    
12. Driver detector has built in CD and DVD writing software so to burn to a CD or DVD pres the 'BURN DISK' button.
13. If you wish to browse the disk or execute and install all the drivers without burning a disk select the 'BROWSE DISK' button and then double click the 'SPLASH' or splash.exe icon shown here by the green arrow.